Bio Nutri Lift & Bio Nutri Lips (Advanced Cannula training) Aintree – AM

Take your Filler experience to the next level, exploring more advanced and unique techniques with Art Filler. FILLMED lead in combination protocols to enhance the skin and structure of the face from every layer… inside out AND outside in. All FILLMED Training days include skin preparation with our Chemical Peel and post-treatment care and advice with Skin Perfusion. No matter your experience, you will also be taught how to correctly use a cannula. You must demonstrate competence in delivering the treatment to the satisfaction of the trainer in order to qualify for a certificate.

Bio Nutri Techniques extend your skills using a Cannula with Art Filler and NCTF in combination. This allows treatments which give instant gratification, but also, long term skin quality enhancement.

Medical Professional Only, Basic Filler qualification required.

Please be aware that due to COVID 19 we are adapting our ways of training to ensure the safety of you and our team. Once you have booked your training you will be invited to join a webinar which you can view and a test paper to complete, in your own time, in ADVANCE of your training day by at least 24 hours. The hands on training allows limited professionals who are invited to bring a model each. The session will be limited to 3 hours and FULL PPE must be worn by all in attendance.

Upon booking the training you will be sent your training kit. You must bring this kit to your training day. The training kit consists of the below items:

1 x 5 vials of NCTF135ha x 3ml  with needles & syringes

1 x 20 Bio Nutri cannulas,

1 x Art Filler Fine Lines 2 x 1.2ml

1 x Art Filler Universal 2 x 1ml

1 x 500ml Natrasan & Trigger

1 x Bright Peel Kit

1 x B3 Recovery Cream 250ml

1 x White Mark Up Pencil

1 x Red Anatomy Pencil

Failure to bring your kit will result in a ‘Training Kit Charge*’ on the day.

In addition to this kit, you will need to bring:

  • Dressing packs or gloves and an apron
  • Soft gauze
  • Sharps box for your own disposal
  • Clinical waste – you will need to take this away with you
  • PPE for yourself and model

Please attend training in appropriate professional attire. Hair should be tied back, and you should be bare from the elbow down when delivering treatment.

COVID Safety

Please note, to limit risk with our interactions, we ask that both you and your model have either:

A negative lateral flow test taken on the day of your training and submitted to info.uk@fillmed.com or via whats app to 07774037749. You can access FREE tests at https://www.gov.uk/order-coronavirus-rapid-lateral-flow-tests

OR if you have had both of your Covid vaccines, you can send us an image of your record card.

You are required to bring a model to your training day. If you are unable to find a model, we will endeavour to help you do so, providing you give us sufficient notice. However, if there is no one available or you fail to notify us up to 48 hours before the training you will be asked to reschedule to a future training date. Your model should wear a mask or face covering unless requested to remove for treatment.

 

Training times

If you are attending the AM session, your training will start at 9.30am. Please arrive no more than 10 minutes early but be prompt to avoid a late start and risk reduced practical treatment time. Your finish time is 1pm. Please ensure you finish your treatment by this time, to ensure we can sanitise the training room in time for our afternoon session. Please ask your model to arrive by 10am. Please note, some of our venues have limited ‘waiting areas’ therefore please ensure they arrive on time and should be prepared to wait until called in.

If you are attending the PM session, your start time is 1.30pm. Please arrive no later than 10 minutes early but be prompt to avoid a late start and risk reduced practical treatment time. Please ask your model to attend at 2pm. Please note, some of our venues have limited ‘waiting areas’ therefore please ensure they arrive on time and should be prepared to wait until called in. Your finish time is 5pm.

Any questions before and after training can be submitted via our website or to info.uk@fillmed.com

 

Training Details

  • All PPE must be provided by the practitioner/trainee
  • Government guidelines will be followed at all times.
  • Please wear a mask or visor throughout the training session.
  • You must provide your own model (or work on each other), this must be agreed in advance.
  • Model consent form and Covid 19 Consent form MUST be completed and presented to the trainer on the day. These can be found on our website under ‘Resources’ on your ‘Account’ page at fillmed.co.uk. We suggest a virtual consult with your model in advance to ensure maximum practical hands-on time
  • All products and consumables are to be supplied by the delegate.

Thank you and we look forward to seeing you on your practical training day soon!

*Training Kit cost if not brought, £50.00

SKU: BNLLNW3-1-1-1-1-1 Category: